Instructions

CONNECTIONS AND CONTROLS
1. on/Off switch
2. BNC output connector
3. calibration output
4. signal and menu display
5. output level indicator
6. up and down set buttons
7. menu button / menu selection up
8. settings menu button / menu selection down
CHANGING THE BATTERIES
Use 4 x AAA 1,5V batteries and note the polarity!
FUNCTION GENERATOR SETUP
Access the setup menu by keeping the settings button pressed in.
You can:
change the user interface language
adjust the display contrast or reverse the display (white with black dots)
change the way the frequency is changed if you keep the up/down button pressed (
Log. will make the frequency change faster)
start or Stop the DEMO mode (useful for demonstration or testing)
press and hold the setting menu button (8) or the menu button (7) to leave the menu
and store the settings
WAVEFORM MENU
This view is shown when sweep is off (check the next chapter).