User Manual

HQWS10001
V. 01 – 27/03/2020 5 ©Velleman nv
The digit on the right indicates the amount of available frequencies.
Once the scan completed, the radio will tune itself to the first alphabetically listed
station available in DAB mode.
Press the on-off button again to put the appliance in standby mode.
Switching Off
Press and hold the on-off button until the appliance switches off, or just press the
button briefly to cancel the standby mode.
5.2 Controls
Using the Buttons
All button actions are a brief press unless otherwise stated in the required action. This
includes the button function of the dials.
Using the Dial
The dials on this appliance are dual action. This means you can use them to scroll
through the available options and press them for the required button actions.
5.3 DAB Mode and Options
Selecting a Station
Use the tuning/enter dial to cycle through the available DAB stations. Press the dial to
tune the radio into the displayed station.
Scanning
Retune or refresh the amount of available DAB stations by pressing the scan button. It
is recommended you do this when the radio has been moved or if you are getting a poor
DAB signal.
DAB Menu Options
Press and hold the info/menu button until [Full Scan] is displayed.
Turn the tuning/enter dial to cycle through the options and press the same dial to
select. Available options:
Full Scan → Manual Tune → DRC → Prune → System
Full Scan
Select [Full Scan] in the menu options to fully erase and retune all the available DAB
stations.