Specifications

4
1.3 Soldering Hints :
1- Mount the component against the PCB surface
and carefully solder the leads
2- Make sure the solder joints are cone-shaped
and shiny
3- Trim excess leads as close as possible to the
solder joint
REMOVE THEM FROM THE TAPE ONE AT A TIME
!
AXIAL COMPONENTS ARE TAPED IN
THE CORRECT MOUNTING SEQUENCE !
Velleman hereby certifies that the device K3511 meets
the essential requirements and all other relevant stipulations of directive 1999/5/
EG and 1995/5/EC.
For the complete conformity declaration check out :
http://www.velleman.be/downloads/DoC/CE_K3511.pdf
Assembly hints