User manual

13
In order to be able to determine which input, if any, has been triggered, a special function has
been built in which, after deactivation of the alarm,
can determine which sensor input has been triggered. This takes place as follows:
• Deactivate the alarm, if it has been triggered 4 tones will be heard and the hazard lights
will flash 4 times
• The dashboard LED will flash rapidly to indicate automatic reset after 60 seconds.
• Open the door or start up to interrupt the reset.
• Depending on what the cause was, the dashboard LED and the internal siren will:
Switch on and off once if a direct sensor alarm has been activated.
Switch on and off twice if a delayed sensor alarm has been activated.
Switch on and off 3 times if the voltage drop detector has been activated.