User manual

9
Mount the rubber feet on the solder side of the PCB, see fig 1.0.
FIG 1.0
17. Rubber feet
Construction
• Place the Velleman® software CD in your CD-ROM player.
• Select ‘Browse through this CD for other Velleman software’ (this message will not be displayed on your screen
if ‘AUTORUN’ is not activated.
• Select the right folder on the CD with Windows Explorer).
• Select the ‘Velleman Kits’ folder. Select the ‘K8048’ folder.
• Run the ‘INSTALL_K8048.EXE’ program in the ‘\Velleman kits\K8048\’ folder.
• Follow the indications on the screen until all files are installed.
18. Software installation