User manual
8
Connect the mains voltage to the transformer; mount a 100mAT security fuse in series with the transformer.
Use a high-quality power cord and plug for the connection to the mains.
When the transformer is live, the LED will light.
Disconnect from mains.
Mount the ICs into the socket (mind the position of the notch)
Reconnect the mains.
Check if the LED lights.
Connect a device with the input e.g. MP3 player, CD player.
Connect the output with a power amplifier.
Turn down the volume to its minimum.
Switch on the power amplifier.
Hint: you can also connect headphones instead of a power amplifier. You can use connections GND-TPR-
TPL; GND is the ground.
Test