Datasheet

Velleman N.V.

Datasheet

KITS

July 2012

Component: K8097

4 CHANNEL USB STEPPER MOTOR CARD

USB controlled stepper motor card, to drive 4 stepper motors.

While the motor turns you can simultaneously check the status of the dry-inputs

(ex. emergency stop signal, limit detection...).

Use the switch inputs to test the motors. Can be used in every application where

positioning is needed (for example, plotter, printer, valves, automations …).

Specifications

- power output per motor: 750mA continuous, ( 1A peak)

- wide range AC - power input: 5 ... 30V

- 6 dry-contact inputs

- 1 logic open collector output

- power supply: 10 ... 30VAC

- dimensions: 140 x 100 x 30mm / 5.51 x 3.93 x 1.18"

Page 1 of 1

Features

- capable of driving 4 independent stepper motors

- suited for bipolar motors

- current can be adjusted for each motor independently (trimmer)

- over current protection sensing

- onboard switch mode supply

- USB connection: control the motors using your computer

- DLL file supplied to write your own software

- includes board to wire connections

The software can be downloaded from our website

PAGE 1
Velleman N.V. July 2012 Datasheet KITS 4 CHANNEL USB STEPPER MOTOR CARD Component: K8097 Features - capable of driving 4 independent stepper motors - suited for bipolar motors - current can be adjusted for each motor independently (trimmer) - over current protection sensing - onboard switch mode supply - USB connection: control the motors using your computer - DLL file supplied to write your own software - includes board to wire connections USB controlled stepper motor card, to drive 4 stepper motors.