Manual

MICW42 HQPOWER

b. Frequency / Channel Selection

Press SET until you see the display as below.

Wait 2 to 3 seconds. Each channel has its own frequency. Choose the channel / frequency using ▲ or ▼ and

press SET to confirm.

c. Setting the Setup Lock

Press SET until you see the display as below.

Choose whether you want to lock the present status or not by using ▲ or ▼. Press SET to confirm.

8. Monitoring Your System

Insert stereo headphones (not incl.) to monitor the vocals via

headphones.

9. The Body-Pack Transmitter (order code MICW43)

a. Description

1. antenna

2. input jack

3. LCD

4. battery compartment

5. power switch

6. ▲▼ buttons – channel / frequency selection

7. SET button

8. battery compartment

9. volume control

10. HI / LO

b. Preparing the Transmitter for Use

Open the battery compartment and insert 2 x AA batteries (order code LR6C, incl.) respecting the polarity.

Insert the plug of the microphone (order code MICW45) or the headset (order code MICW44, not incl.) into the

input jack.

c. Channel Selection

Switch on the transmitter by sliding the power switch to ON. Press SET and select the display menu (disp).

Wait 2 to 3 seconds and select the channel menu (channl) using ▲ or ▼. Press SET again to enter the menu.

You will see next display.