Data Sheet
  VMA208 
V. 02 – 07/03/2018  3  ©Velleman nv 
5.  Overview 
VMA208 
This is a MMA8452Q accelerometer module. The MMA8452Q is a smart low-power, three-axis, capacitive 
MEMS accelerometer with 12 bits of resolution. It is packed with embedded functions with flexible user 
programmable options, configurable to two interrupt pins. Embedded interrupt functions allow for overall 
power savings relieving the host processor from continuously polling data. It has user-selectable full scales of 
+-2g/+-4g/+-8g  w ith high-pass filtered data, as w ell as non-filtered data available real-time This board, 
breaks out the ground, power, I2C and two external interrupt pins, which make it easy to use in project. 
  1.95 V to 3.6 V supply voltage  
  1.6 V to 3.6 V interface voltage 
  +-2g/+-4g/+-8g  dynamically selectable full-scale 
  Output Data Rates (ODR) from 1.56 Hz to 800 Hz 
  12-bit and 8-bit digital output 
  I2C digital output interface (operates to 2.25 MHz with 4.7 kΩ pullup) 
  two programmable interrupt pins for six interrupt sources 
  three embedded channels of motion detection 
  orientation (portrait/landscape) detection with set hysteresis 
  high pass filter data available real-time 
  current consumption: 6 µA - 165 µA 
6.  Pin Layout 
3.3V 
Power output – 3.3 V output. 
Vcc 
Power supply – It should be between 3 and 5 V. 
SDA 
I2C data signal – Bi-directional data line. Voltage should not exceed power 
supply. 
SCL 
I2C clock signal – Master-controlled clock signal. Voltage should not exceed 
power supply. 
SA0 
I2C address – I2C least significant bit of the device I2C address. 
I2 
Interrupt 2 – Programmable interrupt. Can indicate data ready, orientation 
change, tap, and more. 
I1 
Interrupt 1 – Programmable interrupt. Can indicate data ready, orientation 
change, tap, and more. 
GND 
Ground – 0 V/common voltage. 
7.  Example 
Please download the library and code from the product page on www.velleman.eu. 
8.  More Information 
Please refer to the VMA208 product page on www.velleman.eu for more information. 
Use this device with original accessories only. Velleman  nv cannot  be held responsible  in the event 
of damage  or injury resulting  from (incorrect) use of this  device. For more info concerning  this 
product  and the latest  version of this manual,  please visit our website  www.velleman.eu.  The 
information  in this manual  is subject to change  without  prior notice. 
© COPYRIGHT NOTICE 
The copyright  to this manual  is owned by Velleman  nv. All worldwide rights reserved.  No part of this 
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise w ithout the 
prior written consent of the copyright holder.  




