User manual

11
THE BODE PLOTTER MODULE :
What ? : Due to the unique scope and generator combination, an automated Bode plot function is possible.
This results in a powerful tool for amplifi er or fi lter measurements.
How ? :
Enable the Circuit Analyser window (• 1)
Connect the scope CH1 input to the output of the circuit or unit under test.•
Connect the generator output to the input of the circuit or unit.•
Adjust the generator output (• 2) to a suitable level.
Adjust the setting of the Bode plot module like V
olt range (• 3) Volt scale,
frequency start and stop range (4)...
Press ‘Start’
(• 5) and observe the screen and measurement window (6)
If the signal is out of the screen range, adjust the Voltage range or generator output level.•
1
263
54
 