User Manual

PEM10D2

V. 02 – 27/11/2013 8 ©Velleman nv

8. Cleaning a nd Maintenance

• Make sure the cover and refle cto r are clean at all times.

• Remove dirt with a soft lightly moist lint-free cloth.

9. Technical Specifications

cover

PMMA (polymethyl methacrylate)

housing ABS (acrylonitrile butadiene styrene)

IP-rating

input vo lta ge 12 - 250V AC or DC

transmitter

infrared LED, wavelength 750 nm

range up to 10 m

beam spreading angle

1.5°

contact capacity

0.5 A / 120 Vac (1A/30 Vdc)

response time

10 ms

delay time of rela y 100 ms

operating temperature -25 to +60°C

storage temperature -35 to +80°C

dimensions transmitter: 122 (H) x 60 (W) x 62 (T)

reflector: Ø 80 x 7 mm

we igh t

± 200 g

Use this device with original a ccessories only. Velleman nv

cannot be held responsible in the event of damage or injury

result ing from (incorrect) use of this device. For more info

concerning this product and the latest version of this ma nua l,

please visit our website www.velleman.eu. The information in

this manual is subject to change without prior notice.

The copyright to this manual is owned by Ve llema n nv. All

worldwide rights reserved. No part of this manual may be copied,

reproduced, translated or reduced to any electronic medium or

otherwise without the prior written consent of the copyright holder.