User manual

VTLAMP2BN/VTLAMP2WN/VTLAMP2WN3/VTLAMP2WN8
V. 05 – 07/06/2016 4 ©Velleman nv
4. Features
 optional
o stand with wheels: VTLAMPST
o table stand: VTLAMPST1
5. Contents and Assembly
Refer to the illustration on page 2 of this manual.
1. Take the lamp and the clamp out of the packaging.
2. Secure the clamp [1] tightly to a solid surface capable of carrying it.
3. Insert the stem [2] into the clamp [1].
4. Insert the power plug into a power outlet.
5. Switch the lamp on by means of the switch [3].
6. Replacing the lamp
1. Unplug the device and let the circular fluorescent lamp cool down before replacing it.
2. The lamp [4] is located behind a plastic diffuser [5] and is held in place by three metal clamps.
Remove all screws that hold the plastic diffuser in place and gently remove the diffuser.
3. Carefully take the defective lamp from the clamps and remove it.
4. Install a new lamp (order code LAMP22) by connecting it and securing it in the metal clamps.
5. Put the diffuser back and fasten its screws.
Caution: If the plastic diffuser is damaged, disconnect the lamp immediately from the mains. The
diffuser is not replaceable. Do not use the lamp with a cracked or broken diffuser.
7. Technical Specifications
VTLAMP2BN
VTLAMP2WN
VTLAMP2WN3
VTLAMP2WN8
dioptre
5
5
3
8
dimensions
arm length
105 cm
width
24 cm
height
6 cm
glass
Ø 120 mm
colour
black
white
white
white
power supply
230 V~, 50 Hz
spare lamp
order code LAMP22 (22 W)
spare magnifying
glass cover
order code
VTLAMP2BN/SP1
(black)
order code
VTLAMP2WN/SP1
(white)
order code
VTLAMP2WN/SP1
(white)
order code
VTLAMP2WN/SP1
(white)
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE – The copyright to this manual is owned by Velleman nv. All worldwide
rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any
electronic medium or otherwise without the prior written consent of the copyright holder.