User manual
VTUSCT6
V. 001 – 19/06/2014 5 ©Velleman nv
ITEMS NOT SUITABLE FOR ULTRASONIC CLEANING
Soft jewellery:
pearls, emerald, ivory, coral, agate, sea turtle shells,
etc.
As these items are soft, scratching may occur during
the cleaning process.
Welded, plated, glued items
Ultrasonic cleaning may increase the gaps inside
welded joints, plated coating or glue which may lead to
breaking loose.
Watches:
unless diving watches with a depth rating over 50 m
(150 ft)
The strong penetration capabilities of the ultrasonic
waves may cause water to penetrate weaker sealed
watches.
Other:
wood, glass, ceramic, camera filters with known cracks
Crack size may be increased by the ultrasonic waves.
4. Features
for cleaning jewellery, dentures, eyeglasses, electric shaver heads, CDs/VCDs/DVDs, etc.
3 colour LED display
o 1 to 30 minute timer
o 5 temperature settings
o working status indicators
cooling fan
three ceramic heaters
overheating protection
three industrial grade ultrasonic transducers
drainage valve
5. Overview
Refer to the illustrations on page 2 of this manual.
General Overview
A
lid
F
drainage valve
B
handles
G
fitting for drainage tube
C
stainless steel tank
H
lid holders
D
housing
I
power socket
E
control panel
J
power switch
Control Panel
1.
Overheat(R) – Ready
Green – ready: normal working status.
Red – overheating: let the ultrasonic cleaner cool down for at least 20 minutes before resuming.
2.
Heater
Press to turn the heater on or off. See 11. heater status indicator.
The heater will turn off automatically when the water reaches the set temperature.
3.
Function
Press to select, to start or to interrupt the degassing function (max. 90 seconds).
See 9. degas status indicator and the note below.
4.
On/Off
Press to switch the ultrasonic cleaner on or off, and to start the cleaning process. The cleaner
will automatically stop when the counter reaches 00:00.
5.
– cleaning time
Counts down after the cleaning process is started.