Instructions Manual Instruction Manual

53
DEFAULT WEATHER ALARM VALUES
Low 960 hPa Wind gust High 100 km/h Pressure
High 1040 hPa Rainfall in 24 hours High 50 mm
Low
0°C
Temperature (In or
Out)
High
40°C
Low 45% Relative Humidity
(In or Out)
High 70%
PRESSURE ALARMS
1. In the normal display mode, press the ALARM key once. The high pressure
alarm display will be shown.
2. Press and hold the SET key for about 2 seconds. The pressure digit will start
flashing.
3. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the high pressure
alarm value. Hold the arrow key in to change the value faster.
4. Press the ALARM key to confirm the setting. The digit will stop flashing.
5. Press the SET key to switch the alarm on or off. The ((())) icon indicates the
alarm is switched on.
6. Press the ALARM key once. The Low Pressure alarm display will be shown.
7. Press and hold the SET key for about 2 seconds. The pressure digit will start
flashing.
8. Press the ▲UP ARROW key or ▼DOWN ARROW key to set the low pressure
alarm value. Hold the arrow key in to change the value faster.
9. Press the ALARM key to confirm the setting. The digit will stop flashing.
10. Press the SET key to switch the alarm on or off. The ((())) icon indicates the
alarm is switched on.
11. Press the ALARM key to move to the indoor temperature alarm settings.