Specifications

ZL388/11
3 ©Velleman nv
4. Charging
• There are 2 ways to charge the device. While charging, the charge
indicator [4] will light up.
Cranking:
Unfold the handle [7] and rotate it with ±3rps (max. 4rps).
Rotate steadily; rotating to slowly will produce a weak charging
current, cranking too violently might damage the cranking
system. Do not crank more than 5 minutes when battery is
charged or more than 15 minutes when battery is low. Do not
abruptly change cranking direction. Switch off the light for faster
charging.
Notes:
o Be careful not to injure fingers or nails when cranking.
o To extend battery lifetime, crank for at least 1 minute once per
month.
o The device will get warm when cranking for a longer time.
o Always fold the handle [7] back in place when finished
cranking.
External power:
Connect the included USB cable into the DC-jack [5].
Plug the USB connector into a powered USB port or suitable 5V
adaptor. Charging time 5~6 hours.
5. Operation
• Power switch [3] functions:
p
ress result
1x white LEDs on - low bri
g
htness
(
red LEDs off
)
2x white LEDs on - hi
g
h bri
g
htness
(
red LEDs off
)
3x red LEDs on – stead
y
(
white LEDs off
)
4x red LEDs on – blinkin
g
(
white LEDs off
)
5x off
• Attach the camping light using the suspension hook [9] or
magnetic base [6].
6. Battery
• This device contains a built-in rechargeable battery. When the
device is end-of-life, this battery must be removed.
• To do this, use a small screwdriver to open the battery
compartment at the back.
• Cut off the battery leads and dispose of the battery in accordance
with local regulations.