BG-C11 BATTERY GRIP Designed for the Canon EOS Rebel SL1 DSLR Camera
Introduction Thank you for choosing the Vello BG-C11 Battery Grip for the Canon EOS Rebel SL1 DSLR Camera. This camera accessory offers users the ability to extend camera shooting time by housing an additional battery for your device. The grip’s ergonomic design enhances the comfort of vertical (portrait) image capturing with the verticalshooting shutter release button. The BG-C11 also includes an IR remote, which can be used to trigger the grip and camera from up to 15' (4.6 m) away.
The BG-C11 should only be used with compatible batteries and devices specified in this manual. 2. Cover the power terminals with the contact cap when the BG-C11 is not in use. This prevents electrical shorts caused by metal objects touching the power terminals. 4. If you notice smoke, an unusual smell, or noise from the battery pack, discontinue use immediately. Remove the batteries and take the device to a Vello authorized reseller. Remove batteries from the grip when not in use. 6.
Battery Grip Overview 7 6 1 2 4 3 5 9 8 11 12 10 13 4 14
7 Contact Cap Protects metal power contacts. Keep this cap on when the grip is not connected to the camera. 3 Integrated IR Receiver Wirelessly triggers the camera using the included IR remote and the battery grip’s integrated IR sensor. 8 Mounting Screw Connects to the camera’s tripod socket. Attachment Wheel Secures the grip to the camera’s tripod socket. 9 4 Camera Battery Door Slot Stores the camera’s battery chamber door when the grip is mounted.
IR Remote Overview 1 2 3 6 1 IR emitter 2 Shutter release button 3 Battery compartment
Vello BG-C11 battery grip • User manual • IR remote with CR2032 battery • One-Year Limited Warranty • Shutter release cable Specifications Power Source One or two Canon LP-E12 Rechargeable Batteries Operating Temperature 32-104°F (0−40°C) Remote Battery Compatibility CR2032 Remote Operating Distance Max. 15' (4.6 m) Dimensions 4.6" x 2.9" x 3.7" (11.7 × 7.4 × 9.4 cm) Weight (without batteries) 5.29 oz.
Attaching The Grip 1. With the camera turned off, op e n the ba t te r y compar tment door and remove the battery. 2. Gently pull the bat ter y chamber door at a 35° angle and remove the door from the camera. 8 3. Slide the battery compartment door into the battery compartment door slot on the grip so that the side showing is flat with no protrusions sticking out.
INTRODUCTION 5. Rotate the at tachment wheel counter clockwise to secure the grip to the camera. 9 6. Connect the shutter release c a ble to the c a mer a’s shutter release port ( ), and plug the other end into the grip’s shutter release port. OVERVIEW Inser t the grip’s power contacts into the camera as shown above. Ensure the camera’s tripod socket and the battery grip’s mounting screw are aligned. ASSEMBLY 4.
7. Insert one or two batteries into the grip and turn on the camera. You will be able to see the battery power level on the LCD screen. 8. Turn the battery grip on using the On/Off switch to activate the IR receiver and shutter release button. Putting the switch in the off position will disable the IR receiver and shutter release button. 10 Note: The Vello BG-C11 can power the Canon SL1 with one or two batteries installed in the grip.
1. Remove the protective plastic flap from the battery compartment. 2. Make sure the Shutter Release Cable is connected to the camera and grip. 3. Point the remote’s IR emitter at the camera and grip. 4. Press the button on the remote to trigger your camera. INTRODUCTION The Vello BG-C11 comes with an IR remote, which can be used to wirelessly trigger your grip and camera from up to 15’ (4.6 m) away. The use of this accessory requires line-of-sight to communicate.
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
