User Manual

Note: When removing the grip,
turn the camera power off, remove
batteries by pressing each side
release, and replace protective
contact cap.
7. Insert one or two batteries
into the grip and turn on the
camera. You will be able to
see the battery power level
on the LCD screen.
8. Turn the battery grip on
using the On/Off switch
to activate the IR receiver
and shutter release button.
Putting the switch in the off
position will disable the IR
receiver and shutter release
button.
Note: The Vello BG-C11 can power
the Canon SL1 with one or two
batteries installed in the grip.
10