User Manual

Tip: If your camera’s lens is set to auto-focus, one press of the remote’s trigger button will focus and fire the camera.

Note: The included IR remote can also trigger your Canon SL1 without the grip installed. Simply set your camera to

( ) Self-time:10sec/remote Mode. Pressing the button on the remote will trigger your camera.

IR Remote

The Vello BG-C11 comes with an IR remote, which can be used to wirelessly trigger your grip and camera from up

to 15’ (4.6 m) away. The use of this accessory requires line-of-sight to communicate. To use the remote, follow these

instructions:

1. Remove the protective plastic flap from the battery compartment.

2. Make sure the Shutter Release Cable is connected to the camera and grip.

3. Point the remote’s IR emitter at the camera and grip.

4. Press the button on the remote to trigger your camera.

OVERVIEW INTRODUCTION

ASSEMBLY