User's Manual

Specifications

You can charge the batteries inside the grip, without removing them, using the included 5 V / 2.4 A power adapter.

Make sure you turn off the camera to begin charging. Then use the included power adapter to connect the battery

grip’s USB-C port to an AC outlet.

The charging indicator LEDs will glow green when charging , and turn off when fully charged. If there are two batteries

in the grip, slot 1 will charge first.

In-Grip Battery Charging

Specifications and design are subject to change without notice.

Power source Up to two Canon LP-E6N/LP-E6NH type rechargeable Li-ion batteries

Canon AC Adapter AC-E6N and DR-E6 DC Coupler

USB port USB-C

USB input 5 V / 2.4 A

Operating temperature

32°F to 104°F (0°C to 40°C)

Dimensions (H × W × D)

1.9 × 5.7 × 3.2 in. (4.9 × 14.4 × 8.1 cm)

Weight 10.2 oz. (290 g) without batteries

OVERVIEW

ASSEMBLY

INTRODUCTION