User Manual

Thank you for choosing the Vello Speedy Bracket.

The Speedy Bracket puts you in control of your lighting whether

you’re shooting horizontally or vertically, and allows you to switch

between the two orientations with just a quick ﬂip of the camera.

Please follow the instructions below to get the most out of your

Speedy Bracket and to prevent improper installation which may

cause damage to your equipment.

CAMERA ROTATING FLASH BRACKET

SPEEDY BRACKET

Rotating Camera

Platform

Speedy

Bracket Grip

Multiple Accessory

Mounting Holes

1/4"-20 Camera

Mounting Knob

1/4"-20 Tripod

Mounting Knob

Removable

Accessory Shoe

Mount

PAGE 1
SPEEDY BRACKET CAMERA ROTATING FLASH BRACKET Thank you for choosing the Vello Speedy Bracket. The Speedy Bracket puts you in control of your lighting whether you’re shooting horizontally or vertically, and allows you to switch between the two orientations with just a quick flip of the camera. Please follow the instructions below to get the most out of your Speedy Bracket and to prevent improper installation which may cause damage to your equipment.
PAGE 2
PREPARING YOUR SPEEDY BRACKET FOR MOUNTING ADJUSTING THE TENSION Before mounting your camera for the first time, you will need to attach the adhesive cork pad included. The Speedy Bracket’s rotation tension has been preset to accommodate most cameras. However, the use of heavier cameras may require additional tightening. If necessary, use a 3/8" socket wrench to adjust all four lock nuts (1-4) in successive 1/8" turns until the desired tension is achieved.