UNIVERSAL INFLATABLE SOFTBOX FOR PORTABLE FLASHES User Manual
INTRODUCTION Thank you for choosing the Vello FD-900 Universal Inflatable Softbox. This light-modifying accessory is designed to diffuse the light fired from on-camera hot-shoe flashes, creating an enhanced and softened quality to the speedlight’s 2 output. The inflatable softbox is highly portable and able to fold and fit into a very small form. Additionally, the setup and breakdown takes less than a minute to complete, creating a reliable addition for on-the-go photographers.
FEATURES • Softens and diffuses light • Reduces shadows and hotspots SPECIFICATIONS Dimensions (inflated) Weight 5.9" × 8.4" × 6.75" (14.9 × 21.3 × 17.1 cm) 2.1 oz. (59.
PRECAUTIONS • Please read and follow these instructions and keep this manual in a safe place. • Do not puncture. • Keep this product away from children. • Ensure not to over-inflate. • Keep this product away from water and any flammable gases or liquids. • Make sure everything is secure before proceeding. • Do not use this item as a flotation device. • Do not stare at the lights when they are powered on. • All photos are for illustrative purposes only. • Handle this product with care.
OVERVIEW Front Back Flash-head Opening Diffusing Surface Inflation Valve Draw String 5
SETUP 1. Flatten the deflated softbox. 2. Lift the plug off the inflation valve and inflate the softbox by pinching the base of the valve and blowing into the opening. 3. Once the softbox can support itself securely, plug the inflation valve. 6 4. Loosen the draw string on the flash-head opening. 5. Insert the flash head into the opening and tighten the draw string until secure.
BREAKDOWN 1. Loosen the draw string on the flash-head opening. 4. Flatten the softbox and store for later use. 2. Remove the flash from the flash-head opening. 3. Unplug the inflation valve and deflate the softbox by pinching the base of the valve and applying light pressure to the unit.
SETUP FOR SMALLER FLASHES To accommodate smaller flash heads, the included rubber tension band can be used to secure your flash to the softbox. 1. Inflate the diffuser by pinching the base of the inflation valve and blowing into the opening. Plug the inflation valve once the diffuser is fully inflated. 2. Slide the tension band over the flash head and position it by the tilt joint.
3. Place the softbox’s opening over the head of your flash and tighten the drawstring. 4. Pull the tension band over the flash head opening material to secure the softbox. 5. To disassemble the diffuser, remove the tension band from over the flash head and follow the “Breakdown” instructions (page 7).
90-DAY LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of ninety (90) days from the original purchase date or thirty (30) days after replacement, whichever occurs later.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.
www.vellogear.com All other trademarks are the property of their respective owners.
