User Manual

23
7. The transmitters and
receiver should be paired
at this time. Press each
transmitter’s pairing/
test button and watch
the indicator light on the
receiver for one quick blink.
8. Reattach the battery
compartment cover for
each receiver.
9. Have your flash unit turned
o and attach it to the
receiver.
0. Turn the flash on and press
the pairing/test button on
each transmitter. Each of
the transmitters should fire
the flash unit.
Note: A receiver can store up to
5 transmitter codes. Each time
a receiver enters pairing mode
and a new Transmitter’s code is
stored, it will delete all previously
stored codes.