User Manual

ManualsBrandsVello ManualsLighting & StudioFreeWave Mini-Stand Flash Trigger Set

26

The transmitter does

not send a signal.

• Check that the transmitter’s

battery polarity has not

been reversed.

• The battery has run out

of power and needs to be

replaced.

TROUBLESHOOTING

The receiver is

not accepting the

transmitter’s code(s).

• Reset the code between

the receiver and the

transmitter(s) (see page 4).

The ﬂash does not

ﬁre or misﬁres.

• Check the batteries of each

device for low power and

replace if needed.

• Check whether the

receiver’s power switch is in

the On position.

• Reset the code between

the receiver and the

transmitter(s) (see page 4).

• Check whether the ﬂash is

in manual mode.