User Manual

14
1. To establish Sync between the Receiver
and a Transmitter, both devices must
be set to the same channel. In the
event that you are using one Receiver
to control and monitor more than one
camera, the Transmitters will need
to be assigned to separate channels.
Simply adjust the top Channel Switch
to select a channel for each Transmitter
(1, 2, 3, or 4).
Note: Switching channels will often
relieve erratic performance due to
environmental interference. If you are
having trouble establishing or maintaining
Sync, try an alternate channel.
2. To change the channel of the Receiver,
press the Channel Switch (CH +/-
button) until you see the proper
number (1, 2, 3, or 4) appear at the top
left of the screen.
3. This Channel Switch also functions
as the Sleep button. Press and hold
the button for 2 seconds to put the
Receiver to sleep. Press any button
on the Receiver (besides the Shutter
Trigger) to wake it back up.
CHANNEL SELECTION
FreeWave
Viewer
MENU
CCT V / AV
CH
+
/-
AV / AUDIO
/
DC 5V CODE
AV / MIC
1 2 3 4
CHANNEL
FreeWave Viewer
Wireless Live-View Remote
ON OFF
ON OFF
Fre eWave
Viewer
MENU
CCTV / AV
CH
+
/-
/