User Manual

17
The FreeWave Viewer Receiver has four
remote shooting modes. All of these
are selectable via the Drive screen in
the Menu. Press the Menu button and
Navigate Left and Right to find the Drive
screen.
Single: Single-shot mode replicates
single-shot mode on your camera. Press
the Shutter/Auto Focus button on your
Viewer halfway to focus and all the way
to release the shutter and take one
image with your camera.
Continuous Shooting: Set the Menu
selection to Continuous, and set the
DSLR camera’s shutter to continuous
shooting mode. Pressing the Shutter/
Auto Focus button will capture a
stream of continuous shots until you
press the button again, the memory
card becomes full, or the buer on your
DSLR becomes full.
Bulb: For long exposures, set the Menu
selection to Continuous, and set the
DSLR camera’s shutter to bulb mode.
Pressing the Shutter/Auto Focus button
REMOTE SHOOTING MODES
will open the shutter; pressing it again
will close the shutter and the image will
be processed by the camera.
Delay Shooting: Set the Menu selection
to one of the “Delay” settings (2s, 5s,
or 10s for 2-second, 5-second, and
10-second delay, respectively), and set
the DSLR camera’s shutter to single-
shot mode. Depress the Shutter/Auto
Focus button halfway to focus; depress
the Shutter/Auto Focus button fully to
release the shutter after the selected
amount of time elapses.