User Manual

20
5. Plug the 3.5 mm side of the cable into the
studio flash sync jack.
6. If your studio flash has a /4˝ phono jack,
use the included 3.5 mm to /4˝ phono
adapter.
7. With your camera and Transmitter
o, loosen the Transmitter’s hot-shoe
locking ring.
8. Insert the Transmitter’s hot shoe into the
camera’s hot-shoe mount, and tighten the
hot-shoe locking ring.
9. Move the Function Switch on both the
Receiver and on the Transmitter to
“Flash.”
0. Confirm that the camera, Transmitter,
Receiver, and studio light are all powered
on.
. Fully press the shutter button on your
camera. All lights connected to Receivers
operating on the same channel as the
Transmitter should fire simultaneously.