User's Manual

14
1. Confirm that the power on your
camera, Transmitter, and Receiver is
turned on.
2. If your flash has a wake-up function:
Press the shutter button on the camera
halfway to wake your flash.
3. If your flash does not have a wake-
up function, you may be able to turn
o sleep mode: Refer to your flash’s
manual to find out if you can turn o
sleep mode and for instructions.
4. Fully press the shutter button on
your camera. All lights connected to
Receivers in the currently selected
group will fire.
Note: When transmitting data to the flash
or studio light through anything other
than the Transmitter’s hot shoe mount,
we recommend using a fully manually-
controlled flash. Because these methods
do not transmit TTL settings, you will
need to set the power output manually.
USING THE FLASH TRIGGER