User's Manual
2
Thank you for choosing the Vello
FreeWave Wireless Remote Shutter
Release. This device triggers your
camera wired or wirelessly, allowing
you to trip the shutter without
disturbing the camera. It’s ideal for
taking pictures of subjects that are
dicult to approach, such as wildlife. It
also eliminates vibrations caused by
pressing your camera’s shutter release
button during macro, close-up, or
long-exposure photography. The
two-second delay function is great for
self-portraits.
Unlike infrared remotes, which
won’t work if the receiver is not
in direct line-of-sight of the
transmitter, the FreeWave uses
radio frequencies. Radio waves
can pass through and around
objects such as walls, windows,
and floors. You can even trigger your
camera around corners.
The FreeWave can transmit over
16,000,000 possible channels, and there
are no dip switches to set. The device
configures with the press of a button.
Your Vello FreeWave
Wireless Remote Shutter Release
kit contains:
Wireless RF Receiver,
Wireless RF Transmitter,
Camera Release cable,
Battery, Lanyard, and Clip.
INTRODUCTION
2 19
This equipment generates, uses, and can
radiate radio frequency energy, and if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
This equipment has been tested and
found to comply with the limits for a
Class B digital device pursuant to Part
15 of the FCC Rules. These limits are
designated to provide reasonable
protection against harmful interference
in a residential installation.
There is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment ON or OFF, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
1. Reorient or relocate the
receiving antenna;
2. Increase the distance between
the equipment and the receiver.
This device complies with Part 15,
Subpart B, Class B of the FCC Rules.
Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference;
2. This device must accept any
interference received,
including interference that may
cause undesired operation.
Any changes or modifications (including
the antennae) made to this device that
are not expressly approved by the
manufacturer may void the user’s
authority to operate the equipment.
FCC COMPLIANCE