User's Manual

ManualsBrandsVello ManualsPhoto AccessoriesFreeWave Plus Wireless Remote Shutter Release 2.4GHz



1. Turn on the Receiver by pressing and

holding the Power button until the

LED lights up.

2. Set the Transmitter to Bulb mode.

3. Set your camera to the Continuous

Shots setting.

4. Press and hold the Transmitter’s

shutter release button halfway to wake

or focus your camera (if set to Auto

Focus).The LED will turn green.

5. A full press of the Transmitter’s shutter

button will trigger the camera to take

continuous photos until you half press

or fully press the shutter button again.

CONTINUOUS MODE | WIRELESS