User's Manual

17
TTL EV Control
The Vello FreeWave Captain’s transmitter
provides the user with the ability to manually
adjust the TTL reading of a TTL-capable
flash. This function can adjust the TTL
reading in 1/3 stops between -3 and +3. To
use this function, simply push the + or - EV
buttons on the bottom of the transmitter.
Tip: Each photographer has their own vision
of proper image exposure. The EV settings
allow the photographer to adjust the TTL
exposure to reflect their own specific vision.
FLASH TRIGGER FUNCTIONS
Note: Remote flash units attached the Vello
FreeWave Captain receiver need to be set to
TTL EV 0 for proper TTL exposure control
by the Vello FreeWave Captain transmitter.
Separate EV adjustments to individual remote
flashes will result in improper TTL exposure.
Note: The Vello FreeWave Captain is optimized for
Nikon and Canon TTL flashes. Not all third-party
flashes may be compatible.
Camera-Specific Information
For more information about your specific camera
visit our page here:
www.vellogear.com/Camera_Specific_Compatibilities/