User's Manual

23
Mounting the Receiver On-Camera
To mount the receiver to your camera,
slide the device into the camera’s hot-
shoe mount. Turn the receiver's tightening
ring to secure it to the camera.
Connecting the Receiver to Your
Camera
A wired connection is required to connect
the receiver to your camera. With all of
the devices o, connect the shutter release
cable to your receiver by inserting the
2.5 mm end into the receiver’s shutter
release [ ] port. Insert the other end
into the camera’s shutter release port.
USING AS A REMOTE SHUTTER RELEASE
Note: To use the FreeWave
Captain in remote shutter
release function with a
flash, mount your receiver
onto a bracket or light
stand. Connect the receiver
to the camera via the
shutter release cable and
mount your flash onto
your camera's hot shoe.