User's Manual

30
Check that channels on all communicating
devices are identical. When turning on
the unit, it is important to review and, if
necessary, reset the group selection.
If first choice of channel does not work, try
a dierent channel until you find one that
works.
Ensure that all cables are installed correctly.
Make sure that the power source for each
device is properly installed and carrying a
sucient charge. Weak batteries can reduce
the distance over which a transmission works.
If you are triggering with a wired connection,
make sure the device is connected using the
correct cable and make sure the cable is
connected to the correct input or output.
TROUBLESHOOTING
Make sure that a communication confirmation
appears on the LCD screen when sending a
signal.
Verify that flash and camera equipment are
operating properly.
Check for a stuck Test button on all units,
including flash devices.
Make sure the devices are within the
maximum operating distance of 300 feet
(100 meters).