User's Manual

1. Press the power button on either the remote control or the sound bar to turn on the sound bar.

2. Switch on the connected device (such as TV, playback devices, game console etc).

3. Press the input button on either the remote control or the sound bar to select your desired input source.

Note: Keep the sound bar display mode the same as input source. For example, if input

source is HDMI ARC, Meanwhile the display will be switched to on the screen of

sound bar.

•

Before connecting the AC power cord, ensure you have completed all other connections.

•

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the

back or the underside of the unit.

•

Connect the mains cable to the AC IN of the unit and then into a mains socket.

•

Power cord quantity and plug type vary by regions.

1. Plug in the power cord with one side to AC IN on sound bar and the other side to an AC wall outlet (see the

following diagram). When you connect the soundbar to the main socket, the unit will be in STANDBY mode,

firstly it will display --

2. Switch on the sound bar by short-pressing button on sound bar or on remote controller, then it will flow

display from right to left. After 12s, the default input mode will automatically appear on display screen.

3. Press and hold the button on sound bar or on the remote controller for 2 seconds to switch it off, and

then disconnect the main plug from the main socket if you want to switch the unit off completely.

Power ON and OFF

Basic Operation

Using the Soundbar

AC IN

Input Source

Description

Sound from a Bluetooth connected device

Sound from a USB storage device

BLUETOOTH

USB

AUX

ARC / OPTICAL

HDMI 1 & HDMI 2

Sound from a connected device (via AUX port)

Audio from TV (via HDMI ARC port or OPTICAL jack)

Sound from a connected device (via HDMI IN port)

To an AC wall outlet