Velocity V50 PROFESSIONAL STEAM IRON SYSTÈME DE REPASSAGE DOMESTIQUE SISTEMA DE PLANCHADO INSTRUCTION MANUAL GUIDE D’UTILISATION MANUAL DE INSTRUCCIONES
CONGRATULATIONS We would like to thank you and congratulate you for purchasing the Velocity home ironing system from Reliable Corporation. With its unique Compact Vapor Generator it will allow you to obtain the benefits of professional pressing combined with the advantages of traditional ironing. For your safety and to fully enjoy the advantages of this product, please take a few minutes to read all the important safeguards and care instructions.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE When using your new iron, basic safety precautions should always be followed, including the following: 1. Use iron only for its intended use. 2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids. 3. The iron should always be turned to «Off» before plugging or unplugging from an outlet. Never yank the cord to disconnect from the outlet. Instead, grasp the plug and pull to disconnect. 4.
ATTENTION • Before using your Velocity iron, remove all paper or plastic bags, plastic sheets, cards and possible stickers that may be on the outside or inside of the appliance that acted as handling protection or sales promotion material. • Read these instructions before first using the iron. • Do not plug it in without checking that the voltage of the iron is the same as your home power. • Take care that the iron cord does not touch the hot parts of the iron.
MAIN COMPONENTS AND ACCESSORIES (Fig 1) 1. 2. 3. 4. 5. 6. Water filler hole cap Water tank Temperature selector Steam activation buttons Operation/temperature level LEDs Water cup BEFORE STARTING TO IRON • With your Velocity iron unplugged from the main outlet, open the filler hole cap Fig 1 (1) by turning it backwards (see arrow). • Due to the high level of water hardness in most areas, Reliable recommends that you always use distilled or demineralized water for ironing.
OPERATION Plug the iron into the main outlet. The operation/temperature LED (5) will light up. By default it will be selected at the lowest temperature range (•). The LED will blink until the selected temperature level has been reached (fig.2-A). Take the iron by the handle and pass the sole over the garment to be ironed. Temperature selection The V50 has 4 temperature settings, which can be selected by pressing the temperature selector (3).
STEAM READY FEATURE For those who want to leave their iron on for periods longer than 8 minutes at a time (without the automatic shut off system activating) the Velocity V50 has a STEAM READY feature that allows the iron to stay on indefinitely. To activate this feature, simply keep one of the two steam activation buttons (4) Fig 3 held for 8 seconds. After holding the Steam Button for 8 seconds, the LEDs will flash 3 times indicating that the auto shut off has been deactivated.
FILLING WITH WATER If during ironing the tank runs dry, after 30 seconds the operation/temperature LEDs (5) of all the levels will start to flash. If the V50 is used without water for a period of one minute, the micro-pump will stop. Disconnect the iron, keep it in an upright postion and refill the tank using the cup (6) that comes with it Fig 1. Plug the iron in again. Once the V50 is plugged in, only the LED of the selected operation/temperature (5) will light up.
TIPS FOR DISPOSING OF THE USED IRON Before disposing of your used iron, you should make it visibly unserviceable and have it disposed of according to current legislation. Ask your Distributor, Town Council or Local Authority for detailed information. WARRANTY CONDITIONS Reliable Corporation accepts no liability for faults in your iron in the event of noncompliance with the specifications of the warranty conditions or failure to follow the operating or maintenance directions included in instruction book.
RELIABLE PRODUCTS WARRANTY Reliable Corporation (“Reliable”) warrants to original purchaser of its products that every product sold by Reliable (a “Reliable Product”) is free from defects in material and workmanship for a period of one year from the date of purchase, if properly used and maintained. Subject to the conditions and limitations set forth below, Reliable will either repair or replace any part of a Reliable Product that proves defective by reason of improper workmanship or materials.
