Manual
www.velodyne.com
CHT-R Series User’s Manual - 13
CARE OF YOUR SUBWOOFER
Do not use any harsh detergents or chemicals to clean the cabinet. Abrasives, detergents, or cleaning solutions
will damage the nish on the cabinet. We recommend using a damp cloth to clean the front, back and sides.
Use a soft cloth with a good quality furniture polish to clean the hand-rubbed, black lacquer, painted top.
During normal conditions, the subwoofer may be left on continuously without any problems. If you plan to leave
the unit unused for an extended period of time, we recommend that you turn o the unit by the master power
switch on the rear panel.
TROUBLESHOOTING AND SERVICE
Before seeking service for your subwoofer, please re-check all systems. Following is a simple
troubleshooting guide to assist you.
1. Verify that the unit is plugged in and power outlet used is active.
2. Is the power switch on?
3. Is unit receiving an input signal from your source?
4. Have all controls on subwoofer (volume, crossover, phase, etc.) been properly set?
5. If unit has been running at high levels, one of the protection circuits may be engaged. Has the built-in
amplier overheated?
6. Has the power button been depressed on the remote?
7. Is the remote non-responsive? We recommend replacing the batteries in the remote. If the protection
circuitry is active, the unit may cycle on and o until operating parameters return to normal. Under more
serious conditions, the unit may shut o completely. Normal operation will return upon cooling, but you
may be required to turn the power o and then on again to reset the unit.
The following conditions require service by a qualied technician:
1. The power cord has become damaged.
2. The unit does not appear to operate normally or exhibits a marked change in performance.
3. The unit has been exposed to water.
4. Some part of the cabinet or circuitry is physically damaged.
Thank You for Purchasing a Velodyne CHT-R Series Subwoofer Product!