User Manual
4
.
www.velodyne.com
Digital Drive User’s Manual
REMOTE CONTROL BUTTONS
A brief description of each button on the remote control follows:
• PWR – Causes woofer to stand by if in “Active”
standby mode.
• NUMERIC KEYP
AD – Used to enter SETUP mode
and for other functions.
• SET (+/-) – Increases or decreases the Q value
for a parametric EQ, or sets values on the
settings page.
• LIGHT – Turns the subwoofer’s fr
ont panel Velodyne
logo indicator on or of
f.
• NIGHT – Limits the peak output of the subwoofer,
and illuminates the logo’
s amber underlining to
signify that the subwoofer is in night mode.
• VOL (+/-) – Raises or lowers the volume of your
subwoofer
.
The blue (V
elodyne) light flashes more
quickly as the volume increases, and the light blinks
out the volume level after you stop adjusting it. For
example, for a volume of 34, you would see three
long blinks followed by four shor
ter ones.
• MUTE – Mutes and unmutes the subwoofer.
• TEST – Used to toggle between the settings screen
and the system response screen during setup.
• EXIT – To exit SETUP mode. The unit will ask if you
want to save settings before exiting.
• SELECT – To toggle field values.
• RESET – Used to reset volume to the last saved
setting on the main screen, and to defeat
crossovers on the settings screen.
• MENU – Enters SETUP mode from the
introductor
y screen.
• PRESETS – To access the five preset and one EQ
defeat listening modes. Initially set at the factory
,
they are fully user adjustable. The blue (V
elodyne)
light flashes the appropriate number of times to
indicate which preset you have selected (e.g. twice
for preset 2).
Figure 1: Velodyne Digital Drive remote control
o