Manual

www.velodyne.com
4 - Digital Drive Series User’s Manual
• PWR – Causes woofer to stand by if in “Active” standby mode.
• NUMERIC KEYPAD – Used to enter SETUP modeand for other
functions.
• SET (+/-) – Increases or decreases the Q valuefor a parametric
EQ, or sets values on the settings page.
• LIGHT – Turns the subwoofer’s front panel Velodyne logo
indicator on or o.
• NIGHT – Limits the peak output of the subwoofer, and illuminates
the logo’s amber underlining to signify that the subwoofer is in
night mode.
• VOL (+/-) – Raises or lowers the volume of your subwoofer.
The blue (Velodyne) light ashes more quickly as the volume
increases, and the light blinksout the volume level after you stop
adjusting it. For example, for a volume of 34, you would see
three long blinks followed by four shorter ones.
• MUTE – Mutes and unmutes the subwoofer.
• TEST – Used to toggle between the settings screen and the
system response screen during setup.
• EXIT – To exit SETUP mode. The unit will ask if you want to save
settings before exiting.
• SELECT – To toggle eld values.
• RESET – Used to reset volume to the last saved setting on the
main screen, and to defeat crossovers on the settings screen.
• MENU – Enters SETUP mode from the introductory screen.
• PRESETS – To access the ve preset and one EQ defeat listening
modes. Initially set at the factory, they are fully user adjustable.
The blue (Velodyne) light ashes the appropriate number of
times to indicate which preset you have selected (e.g. twice for
preset 2).
NOTE: The button in the upper left is not used.
Figure 1: Velodyne Digital Drive remote control
REMOTE CONTROL BUTTONS
A brief description of each button on the remote control follows: