Manual
www.velodyne.com
Digital Drive Series User’s Manual - 15
Figure 5: SYSTEM SETTINGS Screen
From this screen the crossover, subsonic lter, phase, polarity, theater/music, volume, and other settings can
be set, as well as specics for each preset, if desired.
Your DD unit comes with six presets, four of which are preprogrammed at the factory. The setup setting is used
to initially set the crossovers, slopes, phase, polarity, and volume for all presets. Then, each preset can be
individually adjusted if desired. The presets are as follows (they are also labeled on the remote):
1. Action/Adventure
2. Movies
3. Pop/Rock
4. Jazz/Classical
5. Custom
6. EQ Defeat
All six presets contain the following elds:
• Low Pass Crossover Frequency and Slope – Adjust the upper limit of your subwoofer’s frequency
response. Select a crossover setting, in increments of 1, between 15Hz and 199Hz and slope at 6, 12,
18, 24, 30, 36, 42 and 48 dB/octave.
• Subsonic Filter Frequency and Slope – Set your subwoofer’s subsonic lter (low frequency limit), in
increments of 1, between 15Hz – 35Hz and slope at 6, 12, 18, 24, 30, 36, 42 and 48 dB/octave.