User`s manual

PHASE - These buttons allow you to optimize the subwoofer
performance for the location and your listening position. Select the
switch position
at which you hear the most bass. The light will blink
according to the following schedule:
odegrees
90 degrees
180 degrees
270 degrees
1 blink
2 blinks
3 blinks
4 blinks
LIGHT -If you wish, you can deactivate the blue front pane/lights on
your DLS-R unit. To do this, press the LIGHT button on your remote.
The lightwill turn off. To reactivate the light, press the LIGHT button
again.
NIGHT- Night mode limits the maximum outputof the subwooferfor
later night listening
or to be more considerate of close neighbors.
Press the night button to turn the night modefeature on or off. Night
mode, when active, is indicated by the reduced intensity
of the light.
VOLUME Control - This control allows you to balance the output
from the subwooferto the main speakers
in your system. This control
should be set to achieve similarvolume level from between both the
main speakers and subwoofer. When pressing volume up
ordown,
the speed at which the powerlight blinks indicatessubwoofervolume
- the faster the blinking, the louder the unit plays.
Note: The volume can also be adjusted via the buttons on the back
panel of the subwoofer. These buttons have the
same effect as
pressing the up
and down volume buttons on your remote.
PRESETS - There are 4 presets, consisting of Movies, R&B - Rock,
Jazz - Classical, and Games. As a preset is chosen, the light flashes
the corresponding numberoftimes. The presets provide the following
characteristics for bass reproduction:
Movies:
R&B - Rock:
Maximum output and impact
for explosions
and
other action adventure movie content.
Provides the driving bass found in today's
rock music.