User`s manual
I
Congratulations!
Congratulations on your purchase of a Velodyne Distortion Limiting
System™
Remote (DLS-R) subwoofer. This system represents the
state-of-the-art
in
low frequency reproduction. Read and follow the
instructions below to insure safe and proper system operation.
Warning!
To
prevent fire
or
shock hazard, do not expose this equipment to
rain
or
moisture.
To
avoid electrical shock,
do
not open speaker
enclosure
or
amp chassis cover. Please observe all warnings on
the equipment itself. There are no user serviceable parts inside.
Please referall service questions
to
yourauthorized Velodyne dealer.
Prior to Installation
Please unpackthe system carefully. Remove all staples used to seal
the carton as they can scratch the cabinet. Please save the carton
and all packaging materials forfuture use. Record the serial number
in the space provided on the warranty card for future reference.
Product Features and Controls
• DSP-controlled
• 4 selectable presets for customized listening mode
• Night-mode setting
• Mute control
• Built-in 160 watt (RMS) power amplifier (DLS-3500R)
• Built-in 175 watt (RMS) power amplifier (DLS-3750R)
• Built-in 200 watt (RMS) power amplifier (DLS-4000R)
• Built-in 600 watt (RMS) power amplifier (DLS-5000R)
• Adjustable (40
to
120 Hz) low-pass crossover with Subwoofer
Direct setting
• Speaker-level inputs and outputs
• 85 Hz high-pass crossover
• Line-level inputs
• Signal sensing auto turn on/off with bypass option
• Variable volume control
• Selectable phase control (0, 90, 180, or 270 degrees)
• Dual staggered low-pass crossover; 12 dB/octave initial, 24
dB/octave ultimate
continued
...
2