CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN A A® To graduate the risk of electric shook, do not remove cover {or back). Ne user-serviceable parts inside.
CONGRATULATIONS Congratulations an your purchase of a Velodrome sub woofer system. This system represents the state-of-the-art in low frequency reproduction and will provide you with years of listening pleasure when properly cared for, Read and follow this instruction manual to insure safe and proper system connection and operation. Caution! Please observe the following precautions to insure safe and proper system operation.
» Frequency response of 28 120 Hz « Multiple staggered low-pass crossovers; 12 dB/octave initial, 48 dbl octave ultimate « Driver Displacement Control circuit prevents over excursion and amp clipping « Blue power indicator LED » High-excursion EPSOM rubber surround « Oversize spider for linearity at high excursion PREPARE FOR INSTALLATION Your new Velodrome sub woofer provides for a number of installation options.
Regardless of where you install your Velodrome sub woofer, it must remain in an upright position (woofer facing forward). Using, shipping or storing the sub woofer in any other position for an extended period of time may result in damage to the unit not covered by warranty. Your new Velodrome sub woofer, like any good speaker system, requires proper positioning within the listening space to provide maximum performance.
sub woofer's response will begin riffing off above the frequency you set this control to. You should set the crossover frequency io obtain a smooth and seamless transition from the sub woofer to the main speakers in your system. If your main speakers are smaller units with limited low frequency output, you may wish to choose a higher frequency (such as 100-120 Hz) than you would with larger speakers which have greater low frequency output.
Power Switch The master power switch is located on the lower half of the unit, This rocker style switch is the main on/off for the unit. This switch should be set to position 1 {up} for on, and § {down) for off. If the unit is to be left unused for an extended period of time, the master power switch should be turned off. Sub woofer Outputs The Velodrome sub woofer is designed to operate using the full range audio signal for input when using the builtin crossover.
Velodrome Minivan" swordsmen * ° Wolsey |v » NX rove") 70 0 POWER SPEAKER LEVEL INPUT oor oe cursors aA ER Sepia b LABEL CAUTION AVIS: swear Ara aE nn EET HOME THEATER RECEIVER LFE OUT Figure 1.
Note: if not using an external crossover, you Should use the built in crossover for optimal performance. When using a single channel input (such as a surround sound processor's sub woofer out or WOLFE, the auto on/off circuit sensitivity will be affected. When one input channel is used instead of two, the unit will see lower signal revels present af the inputs. This may cause the unit to turn off when listening at iow volume feels.
Velodrome Minivan" superwomen "| * loge |e . a row on) ans commas "| » CROSSOVER + . se dos OWES WER gf) Wrongdoer One TE) 5 on Parse 117s oie Sa A CAUTION A AIS! smo oc Tami on ins AMPLIFIER PER-AMP MAIN INPUTS MAIN OUTPUTS MAIN OUTPUTS RIGHT LEFT RIGHT LEFT RIGHT LEFT $ $ TO SATELLITE SPEAKERS =. | Figure 2.
SPEAKER-LEVEL CONNECTIONS Figure 3 shows an easy way fo connect your Velodrome sub woofer directly 10 your receiver or integrated amplifier, if it lacks line-level outputs. You may also connect your satellites directly to your receiver or amplifier along with the sub woofer. Your receiver or amplifier will not notice the additional load of the sub woofer due to the high input impedance. Velodrome Minivan” superwomen Vie CROSSOVER» . woe" wis HEAL gf GOFER POWER Ea).
Caution ll! To avoid damage to your main amplifier, be sure fo maintain correct polarity when making all connections. Red (positive) to red, and black (negative) to black. Be sure that alf connections are tight, and that there are no loose strands or frayed wires. SUB WOOFER OUTPUTS The Velodrome sub woofer is designed to operate using the full range audio signet for input when using the built-in crossover.
CARE OF YOUR SUB WOOFER Your Velodrome sub woofer does not require any regular: maintenance. Normal dusting or cleaning of the surface for appearance purposes are all that is required. We suggest you avoid any harsh detergents or chemicals when cleaning the cabinet. Abrasives, detergents, or cleaning solutions may damage the finish on the cabinet.
TROUBLESHOOTING AND SERVICE if you should experience a problem with the operation of your sub woofer, pleases check all of the following before seeking service, Following is a simple troubleshooting guide to assist you. 1. Verify that the unit is plugged in, power outlet used is active and supplying proper voltage. . is the power switch on? is the auto turn nonfood set properly? is the unit receiving an input signal from your source? . ‘Have all controls on the sub woofer {volunteer, crossover, phase, sic.
Minivan SPECIFICATIONS Woofer 8" forward firing {6.5 piston diameter) Amplifier 2000 watts Dynamic {Class D) 1000 watts RMS Power High Pass Crossover 80 Hz (6 dbl octave) Low Pass Crossover 40 Hz-120 Hz 12 dB octave initial, 48 dB octave ultimate Frequency Response 28120 Hz dB) Harmonic Distortion «5% (typical) Magnet Structure 204 0z {12.7 bs) Voice Colt 2.5" Dual Layer inner/outer wind inputs Line and Speaker Level Outputs Line-level, 80 Hz up Phase 0° or 180° Video Shielded No. Dimensions {HWY} (inc.
FOR YOUR RECORDS. .. DATE PURCHASED DEALER, SERIAL# NOTE: Please complete and return your warranty card within fen (10) days or Register... easier www.velodyne.com Thank You for Purchasing a Minivan Sub woofer! LIMITED WARRANTY VELODROME ACOUSTICS, Inc. {'VELODROME) warrants ll powered sub woofers for a period of two years and full range speakers for a period of five years.