Operation Manual

www.velodyne.com
SC-1250 Amplier User’s Manual - 3
SETUP CHECKLIST
Besuretodothefollowingtoensurethebestperformancefromyoursubwoofer(s):
 Ifpossible,optimizetheplacementofthesubwoofer(s)inthelisteningarea.Seepage11oftheUser’s
Manual.
Install and wire the subwoofer per the instructions on pages 3 - 9.
Select the proper model per the instructions on page 11.
Besurethelowpasscrossoverissetcorrectly.Seepages9-10.
BesuretoequalizethesubwooferusingthemicrophoneandAuto-EQfeature.
Besuretosetthephasecontrolontheremote.Seepage12.
Select the correct preset for the source material. See pages 13 – 14.
YournewVelodyneamplierprovidesforanumberofinstallationoptions.Readalltheinstallationinformation
below in order to determine which installation option is best for your system. Remember to perform all installation
procedureswithsystempowerturnedo.
INSTALLATION
FRONT PANEL CONTROLS AND DISPLAYS
Figure 1: Front Panel Connections of the SC-1250.
Following are brief descriptions of the controls described in Figure 1. More detail on these
controls can be found in the next section.
(1) Power LED
 ThisLEDilluminateswhenthepowerison.Blueisnormaloperation.Itturnsamberwhentheunitisin
standby mode or the remote has been used to deactivate the unit. This LED dims when the unit is in
night mode.
(2) Power Switch
 Thispushbuttonstyleswitchisthemainon/ofortheunit.