Operation Manual
www.velodyne.com
8 - SC-1250 Amplier User’s Manual
(16) Auto ON/OFF Switch
Use this switch to select between auto-on active and auto-on inactive (constant on) operation. For
maximumamplierlife,werecommendtheAutoON/OFF“Active”setting.
(17) Speaker Level Output Terminals (See Figure 5)
These connections send a crossed-over speaker-level signal to the front speakers. When connected
in this fashion, your satellite speakers will be crossed over at 80 Hz. This removes the lower bass
frequenciesfrom your satellites, enabling them to doa better job reproducinghigh frequenciesand
giving your receiver’s amp more headroom (up to 50% more power).
Youmayalsoconnectyoursatellitesdirectlytoyourreceiveroramplieralongwiththesubwooferifyou
wish to bypass this crossover.
Speaker-Level Connection
Figure 5: Speaker-Level Connection.