Operation Manual

www.velodyne.com
SC-1250 Amplier User’s Manual - 13
listening position. Select the switch position at which you hear the most bass. The LED will show the
phaseselectedbyshowing“PH”followedbythephasenumber.
• LIGHT — If you wish, you can deactivate the numeric LED on your SC-1250. To do this, press theLIGHT
buttononyourremote.ToreactivatetheLED,presstheLIGHTbuttonagain.
• NIGHT — Night mode limits the maximum dynamic output of the subwoofer for late night listening or to
bemoreconsiderateofcloseneighbors.Pressthenightbuttontoturnthenightmodefeatureonoro.
Activationofnightmodecauses“n”toappearbrieyonthedisplay.Whennightmodeisdeactivated,
thedisplayshows“no”andthenreturnstonormalfunction.
• VOLUME CONTROL — This control allows you to balance the output from the subwoofer to the main
speakers in your system. This control should be set to achieve similar volume level from between both
the main speakers and subwoofer. When pressing volume up or down, the volume level is shown on the
numeric LED on the front panel.
Note:Thevolumecanalsobeadjustedviathevolumebuttonsonthefrontpaneloftheamplier.These
buttonshavethesameeectaspressingtheupanddownvolumebuttonsonyourremote.
• PRESETS —Thereare4presets,consistingofMovies,R&B–Rock,Jazz–Classical,andGames.As
a preset is chosen, the preset is shown on the numeric LED as P1 for preset 1, P2 for preset 2, etc. The
presets provide the following characteristics for bass reproduction:
Movies: Maximum output and impact for explosions and other action adventure movie
content.
R&B–Rock: Providesthedrivingbassfoundintoday’srockmusic.
Jazz–Classical:Thetightest,cleanest,lowestdistortionbass.Theattestfrequencyresponseofthe
four presets.
Games: Maximum loudness available for the impact of video games.