USER’S MANUAL In-Ceiling Grille SubContractor TM Series
www.velodyne.
TABLE OF CONTENTS Congratulations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Velodyne Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CONGRATULATIONS Congratulations on your purchase of a Velodyne in-ceiling grille. The Velodyne in-ceiling grille is for use with the SC-IF/IC (In-Floor/In-Ceiling) or SC-600 IF/IC subwoofers. Read and follow this instruction manual to ensure safe and proper installation. Prior to Installation Please unpack the grille carefully. Please save the carton and all packaging materials for future use. Warning Before installing the Velodyne in-ceiling grille, have the subwoofer location established.
Installation instructions Retrofit 1. Determine the center position for the subwoofer installation location. 2. Puncture a small hole through the ceiling material at the corresponding driver center location. Figure 1. Position the SC-600 In-Ceiling template on desired installation location. 3. Center the SC-ICG cut-out template to the hole created in the previous step. 2 -SC-ICG User’s Manual www.velodyne.
4. Cut the ceiling material along the solid line noted on the template, following the outer diameter of the circular template. Figure 2. Cut ceiling material along specified solid cut-line. www.velodyne.
5. Insert the paint template into the in-ceiling grille basket. Paint the grille basket flange to match decor. 6. After the paint has dried, remove the paint template and insert the in-ceiling grille basket into the hole in the ceiling material. Figure 3. Install the basket flange into the cut-out ceiling material. 4 -SC-ICG User’s Manual www.velodyne.
7. Push the backside of the basket flange flush with the ceiling material, and tighten the four screws on the basket engaging the clamps. The four screws should be hand tightened, or torqued to 4 inch pound. 8. Carefully push the aluminum grille into the groove on the grille basket. Ensure that the flange and the grille edge are flush. Figure 4. Push the SC-600 In-Ceiling Grille into the grille basket. New Construction 1.
SPECIFICATIONS SPECIFICATIONS SC-600 In-Ceiling Grille Frame High strength ABS plastic Grille Paintable aluminum alloy Grille Dimensions 12” Cut-out Dimensions 11” Warranty (parts/labor) Shipping Weight (approx.) Five years (for normal usage) 5 lbs. (2.3 Kg) NOTE: If you need to file a warranty claim for your product, you will still need to submit to Velodyne the original sales invoice or other proof of ownership and date of purchase.
Velodyne Products 120V DD® Series DD-10 DD-12 DD-15 DD-18 Digital Drive 1812 Signature Edition DEQ-R Series Impact Series Impact - Mini Impact -10 Impact -12 MicroVee® SubContractor™ Series SC-1250 SC-8 SC-10 SC-12 SC-15 SC-IW SC-IF/IC SC-600 Amp SC-600 IW SC-600 IF/IC DEQ-8R DEQ-10R DEQ-12R DEQ-15R MiniVee® DLS™-R Series SPL™-R Series VX-10 MicroVee® SubContractor™ Series DLS-3500R DLS-3750R DLS-4000R DLS-5000R 230V DD® Series DD-10 DD-12 DD-15 DD-18 Digital Drive 1812 Signature Edition C
SC-ICG-RevA_MAY2012 Velodyne Acoustics, Inc. 345 Digital Drive 408.465.2800 voice Service E-mail: service@velodyne.com Morgan Hill, CA 95037 408.779.9227 fax Product E-mail: help@velodyne.com www.velodyne.com 408.779.9208 service fax Technical E-mail: techhelp@velodyne.