User's Manual
26 VELUX VELUX 27
Enter Back
P1
P2
More Save
P1
P2
Creating a Group
Menu
Locate
P1
P2
Enter Back
P1
P2
Enter Back
P1
P2
ENGLISH ENGLISH
5
Displays a list of the individual products within the product
type in question.
Press
to highlight the product to be included in Group 1.
The individual products can be identified by pressing
for a short period of time. This will activate the product
briefly.
Press "Enter" to confirm your choice.
6
The display asks whether additional products are to be
moved to Group 1.
• Press "More" to move additional products to Group
1. You will return to the list in item 5. Repeat items 5-6
until these products have been moved to Group 1.
• Press "Save" to create Group 1.
7
The display shows that Group 1 has been created in
Room 1.
Groups are edited according to the same principle as
Rooms.
Note: When operating Groups a delayed execution of
commands might occur. If you want a particular product to
respond at once, this product must be operated individu-
ally.
2
1
3
4
To make it easier to locate and operate products of the
same type simultaneously, you can create a Group.
The example shows a room with four
skylights, each with a skylight oper-
ator. It is shown how to create Group
1 consisting of the skylight operators
on the two skylights No. 3 and No. 4
(indicated as "Window" in the remote
display). The example presupposes
that Room 1 has been created.
Note: A number of Groups, "All" each consisting of all
products of the same type in the Room in question, was
created automatically when Room 1 was created, see sec-
tion Room, Group and Zone.
A Group created across more Rooms is shown in the
display as a Zone.
1
Press "Menu".
2
Scroll through the menus:
3
Displays a list of the Rooms created.
Press to highlight the Room in which Group 1 is to be
created.
Press "Enter" to confirm your choice.
4
Displays a list of the product types in Room 1.
To choose the product type skylight operator, press to
highlight "Window".
Press "Enter" to confirm your choice.
2
1
3
4
R1