User's Manual
36 VELUX VELUX 37
Menu
Locate
Select
P1
P2
Back
Enter Back
P1
P2
Enter Back
P1
P2
Back
P1
P2
Enter Back
P1
P2
Enter Back
P1
P2
Enter Back
P1
P2
Enter
Enter
P1
P2
Edit
ENGLISH ENGLISH
Program under Shortcut P1/P2
A program under Shortcut P1/P2 contains a sequence
of operating commands for one or more products. The
sequence is activated by pressing shortcut key P1 or P2.
You can record up to eight programs, four under each of
the shortcut keys. The programs can be set to be execut-
ed immediately, with a delay or at a certain time.
The example shows how to program skylight No. 1
(indicated as "Window" in the remote display) to open
immediately and close again after 1 hour and 30 minutes
(delay) by a single pressure on shortcut key P1.
1
Press "Menu".
2
Scroll through the menus:
Note: If the current time and date has not been set al-
ready, please do so before choosing "Shortcut P1/P2", see
section Time and date.
3
Locate the skylight. The relevant product can be identi-
fied by pressing for a short period of time. This will
activate the product briefly.
Press "Select" to select the product.
4
The display shows the selected product.
• Press "Enter" to confirm your choice.
• Press "Edit" to select additional products from the
list.
5
Press to highlight "Set position".
Press "Enter" to confirm your choice.
6
Press to set the opening position of the skylight.
100% corresponds to fully open.
Press "Enter" to confirm your setting.
7
Press to highlight "Save position".
Press "Enter" to confirm your choice.
8
The display shows two time setting options.
Press
to highlight "Delay", ie the time that will pass
from pressing P1 till the product will be activated.
Press "Enter" to confirm your choice.
9
Press to set the relevant delay. First choose minutes.
Choose 0 minutes if you want the skylight to open im-
mediately.
Press "Enter" to change to hours.
10
Press to set hours.
Press "Enter" to confirm your setting.