User's Manual
14 VELUX VELUX 15
Enter Back
Menu
Locate
Enter Back
P1
P2
P1
P2
Menu
Locate
P1
P2
P1
P2
Menu
Locate
2
3
1 54
ENGLISH ENGLISH
Locating and operating a product
More than one skylight
With more than one electrical product
One skylight is equipped with a skylight operator. In
addition, all five skylights are each equipped with a roller
shade.
The example shows how to locate and operate roller
shade No. 3.
1
Press "Locate".
2
Displays the list of product types within the area House.
To operate one of the roller shades, press
and high-
light "Blind".
Press "Enter".
3
Press to highlight roller shade "No. 3".
Press "Enter".
4
Press
to start operation.
Closing the skylight automatically
When a skylight has been opened with the remote control,
you can set it to close again automatically after a certain
time.
For instance you might want to air your house briefly
when returning home. The possible settings are: Disabled,
5 min, 10 min, 15 min, 20 min, 30 min, 45 min and 60 min.
The example shows how to time skylight No. 1 (indi-
cated as "Window" in the remote display) to close after
10 minutes.
1
Locate skylight No. 1 (indicated as "Window").
Press
to open the skylight.
2
The display shows the icon and the text "Auto Close".
Start item 3 within 5 seconds, otherwise the skylight will
not close automatically.
3
Scroll via through the time options and choose
"in: 10 min".
4
The display shows the icon and counts down until the
skylight is closed.
If you close the skylight earlier than chosen, the function
will be cancelled.
Note: Registered products can be set to operate auto-
matically via Programs.