Use and Care Manual
Operators
While performing maintenance on electrically operated venting skylights, turn the power o at the breaker box to avoid •
accidental injuries
Open skylights (then turn o power if electric) and wipe chain o using a clean, dry towel. Do not use any type of cleaner or •
solvent.
Keep debris clear of chain.•
Manual skylights: Inspect the loop or crank handle to make sure the set-screw is secure.•
The internal workings of the manual and the electric operators are considered maintenance free over the lifetime of the skylight.•
Operators are pre-lubed and need no additional lubrication.•
Condensation
Condensation is not a skylight defect; it’s a result of atmospheric conditions inside and outside the home.•
Condensation is the result of warm moist air coming in contact with a cooler surface, in this case, the skylight glass. Think of the •
glass of ice-water on a summer day and the “sweat” on the outside of the glass.
Since Mother Nature (outside conditions) can’t be controlled, condensation must be dealt with from inside the home.•
For more on controlling condensation please refer to the condensation section of our site. (http://www.veluxusa.com/•
Consumer/Service/Common_service_topics/Condensation_inside)
General Information
For replacement parts or glass, get the skylight serial number and contact a VELUX customer service representative for •
ordering information.
Locating the serial number will expedite the ordering process and ensure the correct parts are sent. •
Refer our Product ID page to locate the skylight serial number at: http://www.veluxusa.com/Consumer/Service/ProductID
Service or warranty issues
We stand behind our products with a promise of lasting service and quality.
Read more about warranty here at: http://www.veluxusa.com/Consumer/Products/warranty