Operating Guide

10 VELUX
®
VELUX
®
11
Set-up of KLI 110 to operate a solar powered blind
The solar powered blind can have two different designs:
1a
Solar powered blind with sliding switch on the right, bottom side of
motor unit:
Slide switch to the right and hold for 1 second.
Caution: Sliding switch to the right and holding for 10 seconds will
delete all previous set-ups.
1b
Solar powered blind with button behind door at the bottom of motor
unit:
Open solar battery door, press button behind the door for 1 second
and close solar battery door.
Caution: Pressing button for 10 seconds will delete all previous
set-ups.
2
Press button R on back of control keypad KLI 110 for 1 second.
3
Press the stop key and then the DOWN key within 3 seconds. This is
only necessary at the initial set-up after installing the blind.
The blind can now be operated by KLI 110.
2 3
1b1a
KLI 110
L R
L R
1 sec
1 sec1 sec
max 3 sec
RESET